Pozdrav ljudi,
Zanima me kako da spojim CID sa radiom CD70 NAVI, na kojim izlazima komunicira sa displejom. U prilogu je slika konektora sto ide u displej i slika radija, hvala unapred. :)
[REŠENO] CD70 NAVI + CID
-
blackwidow
- Postovi: 3
- Pridružen/a: 05 stu 2018 14:49
Nemaš dopuštenje za pregledavanje privit(a)ka dodan(og)ih postu.
-
Admin tvzmaj
- Super Moderator
- Postovi: 2642
- Pridružen/a: 13 vel 2012 00:28
- Lokacija: Jagodina
- Kontakt:
Oni komuniciraju preko CAN bus linije.
Evo raspored pinova za CD70
Pin 1: right-rear speakers +
Pin 5: Speaker-right-rear pin 2: front-right +
Pin 6: front-right +
Pin 3: front-left +
Pin 7: front-left --
Pin 4: rear-left speaker +
Pin 8: rear-left speaker --
Pin 9: Signal mid-speed CAN bus High
Pin 10: Signal mid-speed CAN bus Low
Pin 11: phone signal muting
Pin 12: Mass
Pin 13: antenna signal control TwinAudio (+12 If concerns when the radio is on. Will check it tomorrow!)
Pin 14: front-center speaker --
Pin 16: front-center speaker +
Pin 15: +12 V (terminal 30) fused with 20A
Pin 17: signal TwinAudio links
Pin 23: right signal TwinAudio
Pin 19: Reference mass TwinAudio
Pin 20: signal activation TwinAudio
Pin 21: Not used
Pin 22: Not used
Pin 26: Not used
Pin 27: Not used
Pin 28: Not used
Pin 29: shielding microphone
Pin 35: microphone signal
Pin 30: signal airbag triggered (deleted from MJ08)
Pin 33: serial data signal navigation
Pin 39: serial data signal navigation
Pin 34: language phone signal
Pin 40: language reference mass phone
Pin 36: Not used
Pin 37: acceleration sensor front-left wheel
Radios, which have received a DAB (On this input can also specify AUX IN):
Pin 31: DAB signal links
Pin 32: DAB signal law
Pin 38: Reference mass DAB
Radios with AUX IN (all radios from MJ08):
All except the CD70Navi and DVD90 have the AUX IN pins on the DAB.
When CD70Navi MJ08 and DVD90 MJ08 there are the following assignment for AUX IN:
Pin 24: AUX IN signal links
Pin 25: right signal AUX IN
Pin 18: Reference mass AUX IN (alebo pouzit PIN 19)
Displej bi trebao ici ovako:
pin 1 positive switched
pin 3 ground
pin 5 can bus low orange/green wire
pin 6 can bus high. Green wire
Mada nisam 100% siguran za displej. Mozda neko zna preciznije jer ima razlike od auta do auta. Napisi iz kog je auta display.
Evo raspored pinova za CD70
Pin 1: right-rear speakers +
Pin 5: Speaker-right-rear pin 2: front-right +
Pin 6: front-right +
Pin 3: front-left +
Pin 7: front-left --
Pin 4: rear-left speaker +
Pin 8: rear-left speaker --
Pin 9: Signal mid-speed CAN bus High
Pin 10: Signal mid-speed CAN bus Low
Pin 11: phone signal muting
Pin 12: Mass
Pin 13: antenna signal control TwinAudio (+12 If concerns when the radio is on. Will check it tomorrow!)
Pin 14: front-center speaker --
Pin 16: front-center speaker +
Pin 15: +12 V (terminal 30) fused with 20A
Pin 17: signal TwinAudio links
Pin 23: right signal TwinAudio
Pin 19: Reference mass TwinAudio
Pin 20: signal activation TwinAudio
Pin 21: Not used
Pin 22: Not used
Pin 26: Not used
Pin 27: Not used
Pin 28: Not used
Pin 29: shielding microphone
Pin 35: microphone signal
Pin 30: signal airbag triggered (deleted from MJ08)
Pin 33: serial data signal navigation
Pin 39: serial data signal navigation
Pin 34: language phone signal
Pin 40: language reference mass phone
Pin 36: Not used
Pin 37: acceleration sensor front-left wheel
Radios, which have received a DAB (On this input can also specify AUX IN):
Pin 31: DAB signal links
Pin 32: DAB signal law
Pin 38: Reference mass DAB
Radios with AUX IN (all radios from MJ08):
All except the CD70Navi and DVD90 have the AUX IN pins on the DAB.
When CD70Navi MJ08 and DVD90 MJ08 there are the following assignment for AUX IN:
Pin 24: AUX IN signal links
Pin 25: right signal AUX IN
Pin 18: Reference mass AUX IN (alebo pouzit PIN 19)
Displej bi trebao ici ovako:
pin 1 positive switched
pin 3 ground
pin 5 can bus low orange/green wire
pin 6 can bus high. Green wire
Mada nisam 100% siguran za displej. Mozda neko zna preciznije jer ima razlike od auta do auta. Napisi iz kog je auta display.